Datasheet

LM120, LM320-N
SNVS756C –APRIL 1998–REVISED APRIL 2013 www.ti.com
LM320T-12 ELECTRICAL CHARACTERISTICS (continued)
Power Plastic Package
Order Numbers
LM320T-12
(TO-220)
Units
Design Output Current (I
D
) 1A
Device Dissipation (P
D
) 15W
Parameter Conditions
(1)
Min Typ Max
Output Noise Voltage T
A
= 25°C, C
L
= 1 μF, I
L
= 5 mA, 400 μV
V
IN
= 17V, 10 Hz ≤ f ≤ 100 kHz
Long Term Stability 24 mV
Thermal Resistance
Junction to Case 4 °C/W
Junction to Ambient 50 °C/W
ABSOLUTE MAXIMUM RATINGS−15 VOLT REGULATORS
(1)(2)
Power Dissipation Internally Limited
Input Voltage
LM120/LM320-N −40V
LM320T −35V
Input-Output Voltage Differential 30V
Junction Temperatures
(3)
Storage Temperature Range −65°C to +150°C
Lead Temperature
(Soldering, 10 sec.) 300°C
(1) Refer to RETS120-15H drawing for LM120H-15 or RETS120-15K drawing for LM120K-15 military specifications.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) This specification applies over −55°C ≤ T
J
≤ +150°C for the LM120 and 0°C ≤ T
J
≤ +125°C for the LM320-N.
LM120K-15 AND LM320K-15 ELECTRICAL CHARACTERISTICS
Metal Can Package
Order Numbers
LM120K-15 LM320K-15
(TO-3) (TO-3)
Units
Design Output Current (I
D
) 1A
Device Dissipation (P
D
) 20W
Parameter Conditions
(1)
Min Typ Max Min Typ Max
Output Voltage T
J
= 25°C, V
IN
= 20V, −15.3 −15 −14.7 −15.4 −15 −14.6 V
I
LOAD
= 5 mA
Line Regulation T
J
= 25°C, I
LOAD
= 5 mA, 5 10 5 20 mV
V
MIN
≤ V
IN
≤ V
MAX
Input Voltage −35 −17 −35 −17 V
Ripple Rejection f = 120 Hz 56 80 56 80 dB
Load Regulation, T
J
= 25°C, V
IN
= 20V, 30 80 30 80 mV
(2)
5 mA ≤ I
LOAD
≤ I
D
Output Voltage, 17.5V ≤ V
IN
≤ V
MAX
, −15.5 −14.5 −15.6 −14.4 V
(1)
5 mA ≤ I
LOAD
≤ I
D
, P ≤ P
D
Quiescent Current V
MIN
≤ V
IN
≤ V
MAX
2 4 2 4 mA
(1) This specification applies over −55°C ≤ T
J
≤ +150°C for the LM120 and 0°C ≤ T
J
≤ +125°C for the LM320-N.
(2) Regulation is measured at constant junction temperature. Changes in output voltage due to heating effects must be taken into account
separately. To ensure constant junction temperature, low duty cycle, pulse testing is used. The LM120/LM320-N series does have low
thermal feedback, improving line and load regulation. On all other tests, even though power dissipation is internally limited, electrical
specifications apply only up to P
D
.
6 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM120 LM320-N