Datasheet

LM117, LM317A, LM317-N
www.ti.com SNVS774N –MAY 2004–REVISED AUGUST 2013
LM117 ELECTRICAL CHARACTERISTICS
(1)
Specifications with standard type face are for T
J
= 25°C, and those with boldface type apply over full Operating
Temperature Range. Unless otherwise specified, V
IN
− V
OUT
= 5V, and I
OUT
= 10 mA.
LM117
(2)
Parameter Conditions
Min Typ Max Units
3V ≤ (V
IN
− V
OUT
) ≤ 40V,
Reference Voltage 1.20 1.25 1.30 V
10 mA ≤ I
OUT
≤ I
MAX
(1)
0.01 0.02
Line Regulation 3V ≤ (V
IN
− V
OUT
) ≤ 40V
(3)
%/V
0.02 0.05
0.1 0.3
Load Regulation 10 mA ≤ I
OUT
≤ I
MAX
(1) (3)
%
0.3 1
Thermal Regulation 20 ms Pulse 0.03 0.07 %/W
Adjustment Pin Current 50 100 μA
10 mA ≤ I
OUT
≤ I
MAX
(1)
Adjustment Pin Current Change 0.2 5 μA
3V ≤ (V
IN
− V
OUT
) ≤ 40V
Temperature Stability T
MIN
≤ T
J
≤ T
MAX
1 %
Minimum Load Current (V
IN
− V
OUT
) = 40V 3.5 5 mA
NDS Package 1.5 2.2 3.4
(V
IN
− V
OUT
) ≤ 15V A
NDT Package 0.5 0.8 1.8
Current Limit
NDS Package 0.3 0.4
(V
IN
− V
OUT
) = 40V A
NDT Package 0.15 0.20
RMS Output Noise, % of V
OUT
10 Hz ≤ f ≤ 10 kHz 0.003 %
V
OUT
= 10V, f = 120 Hz, C
ADJ
= 0 μF 65 dB
Ripple Rejection Ratio
V
OUT
= 10V, f = 120 Hz, C
ADJ
= 10 μF 66 80 dB
Long-Term Stability T
J
= 125°C, 1000 hrs 0.3 1 %
NDS (TO-3) Package 2
Thermal Resistance, θ
JC
°C/W
Junction-to-Case
NDT (TO) Package 21
Thermal Resistance, θ
JA
NDS (TO-3) Package 39
Junction-to-Ambient °C/W
NDT (TO) Package 186
(No Heat Sink)
(1) I
MAX
= 1.5A for the NDS (TO-3), NDE (TO-220), and KTT (TO-263) packages. I
MAX
= 1.0A for the DCY (SOT-223) package. I
MAX
= 0.5A
for the NDT (TO) and NDP (TO-252) packages. Device power dissipation (P
D
) is limited by ambient temperature (T
A
), device maximum
junction temperature (T
J
), and package thermal resistance (θ
JA
). The maximum allowable power dissipation at any temperature is :
P
D(MAX)
= ((T
J(MAX)
- T
A
)/θ
JA
). All Min. and Max. limits are ensured to TI's Average Outgoing Quality Level (AOQL).
(2) Specifications and availability for military and space grades of LM117/883 can be found in the LM117QML datasheet (SNVS356).
Specifications and availability for military and space grades of LM117/JAN can be found in the LM117JAN datasheet (SNVS365).
(3) Regulation is measured at a constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to
heating effects are covered under the specifications for thermal regulation.
Copyright © 2004–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LM117 LM317A LM317-N