Datasheet
LM117HV, LM317HV
www.ti.com
SNVS773C –APRIL 2000–REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS
(1)(2)
Power Dissipation Internally limited
Input—Output Voltage Differential +60V, −0.3V
LM117HV −55°C to +150°C
Operating Junction Temperature Range
LM317HV 0°C to +125°C
Storage Temperature −65°C to +150°C
Lead Temperature (Soldering, 10 sec.) 300°C
ESD Tolerance
(3)
2000V
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits.
(2) Refer to RETS117HVH for LM117HVH or RETS117HVK for LM117HVK military specifications.
(3) Human body model, 1.5 kΩ in series with 100 pF.
ELECTRICAL CHARACTERISTICS
(1)
Parameter Conditions LM117HV LM317HV
Units
Min Typ Max Min Typ Max
Line Regulation T
J
= 25°C, 3V ≤ V
IN
− V
OUT
≤ 60V 0.01 0.02 0.01 0.04 %/V
I
L
= 10 mA
(2)
Load Regulation T
J
= 25°C, 10 mA ≤ I
OUT
≤ I
MAX
0.1 0.3 0.1 0.5 %
Thermal Regulation T
J
= 25°C, 20 ms Pulse 0.03 0.07 0.04 0.07 %/W
Adjustment Pin Current 50 100 50 100 μA
Adjustment Pin Current Change 10 mA ≤ I
L
≤ I
MAX
0.2 5 0.2 5 μA
3.0 V ≤ (V
IN
− V
OUT
) ≤ 60V
Reference Voltage 3.0 V ≤ (V
IN
− V
OUT
) ≤ 60V
(3)
1.20 1.25 1.30 1.20 1.25 1.30 V
10 mA ≤ I
OUT
≤ I
MAX
, P ≤ P
MAX
Line Regulation 3.0V ≤ (V
IN
− V
OUT
) ≤ 60V, 0.02 0.05 0.02 0.07 %/V
I
L
= 10 mA,
(2)
Load Regulation 10 mA ≤ I
OUT
≤ I
MAX
(2)
0.3 1 0.3 1.5 %
Temperature Stability T
MIN
≤ T
J
≤ T
MAX
1 1 %
Minimum Load Current (V
IN
− V
OUT
) = 60V 3.5 7 3.5 12 mA
Current Limit (V
IN
− V
OUT
) ≤ 15V
K, NDE Packages 1.5 2.2 3.5 1.5 2.2 3.7 A
NDT Package 0.5 0.8 1.8 0.5 0.8 1.9 A
(V
IN
− V
OUT
) ≤ 60V
K, NDE Packages 0.3 0.3 A
NDT Package 0.03 0.03 A
RMS Output Noise, % of V
OUT
T
J
= 25°C, 10 Hz ≤ f ≤ 10 kHz 0.003 0.003 %
Ripple Rejection Ratio V
OUT
= 10V, f = 120 Hz 65 65 dB
C
ADJ
= 10 μF 66 80 66 80 dB
Long-Term Stability T
J
= 125°C 0.3 1 0.3 1 %
(1) Unless otherwise specified, these specifications apply: −55°C ≤ T
J
≤ +150°C for the LM117HV, and 0°C ≤ T
J
≤ +125°C for the
LM317HV; V
IN
− V
OUT
= 5V and I
OUT
= 0.1A for the TO package and I
OUT
= 0.5A for the TO-3 and TO-220 packages. Although power
dissipation is internally limited, these specifications are applicable for power dissipations of 2W for the TO and 20W for the TO-3 and
TO-220. I
MAX
is 1.5A for the TO-3 and TO-220 and 0.5A for the TO package.
(2) Regulation is measured at constant junction temperature. Changes in output voltage due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
(3) Refer to RETS117HVH for LM117HVH or RETS117HVK for LM117HVK military specifications.
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LM117HV LM317HV