Datasheet

Revision history LM2902
20/21 Doc ID 2469 Rev 7
8 Revision history
Table 9. Document revision history
Date Revision Changes
30-Nov-2001 1
Initial release.
01-Jul-2005 2
PPAP references inserted in the datasheet, see Table 8: Order codes.
ESD protection inserted in Table 1 on page 4.
31-Oct-2005 3
An error in the device description was corrected on page 1.
PPAP reference inserted in the datasheet see Table 8: Order codes.
Minor grammatical and formatting changes throughout.
18-Jun-2007 4
Values for thermal resistance junction to ambient and ESD HBM corrected in
Table 1: Absolute maximum ratings (AMR).
Values for thermal resistance junction to case added in Table 1: Absolute
maximum ratings (AMR).
Table 2: Operating conditions added.
Electrical characteristics figure captions updated.
Section 6: Package information updated.
Table 8: Order codes moved to end of document.
18-Dec-2007 5
Removed power dissipation parameter from AMR table and added maximum
junction temperature.
Updated footnotes for automotive grade order codes.
Updated format of package information.
16-Feb-2012 6
Added AMR values for input current in Tabl e 1 on page 4.
Added QFN16 3 x 3 mm package information in Chapter 7: Ordering
information.
Removed LM2902YD order code from Table 8 and changed status of
LM2902YPT order code.
29-Jan-2013 7
Small text/layout changes in Features and Description.
Updated Figure 2: Pin connections (top view).
Table 3: VCC+ = 5V, VCC- = Ground, V
o
= 1.4V, Tamb = 25°C (unless
otherwise specified): DV
io
replaced by ΔV
io
/ΔT.
Replaced SO-14 package silhouette, package mechanical drawing (Figure 29)
and package mechanical data (Table 5).