Datasheet

1
2
3
5
4
LM2767
SNVS069C –FEBRUARY 2000–REVISED MAY 2013 www.ti.com
Connection Diagram
5-Pin Small Outline Package
Figure 2. DBV Package Top View Figure 3. Actual Size
PIN FUNCTIONS
Pin Name Function
1 V
OUT
Positive voltage output.
2 GND Power supply ground input.
3 CAP− Connect this pin to the negative terminal of the charge-pump capacitor.
4 V+ Power supply positive voltage input.
5 CAP+ Connect this pin to the positive terminal of the charge-pump capacitor.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS
(1)(2)
Supply Voltage (V+ to GND, or V+ to V
OUT
) 5.8V
V
OUT
Continuous Output Current 30 mA
Output Short-Circuit Duration to GND
(3)
1 sec.
Continuous Power Dissipation (T
A
= 25°C)
(4)
400 mW
T
JMax
(4)
150°C
(1) Absolute maximum ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when
operating the device beyond its rated operating conditions.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) V
OUT
may be shorted to GND for one second without damage. For temperatures above 85°C, V
OUT
must not be shorted to GND or
device may be damaged.
(4) The maximum allowable power dissipation is calculated by using P
DMax
= (T
JMax
− T
A
)/θ
JA
, where T
JMax
is the maximum junction
temperature, T
A
is the ambient temperature, and θ
JA
is the junction-to-ambient thermal resistance of the specified package.
OPERATING Ratings
θ
JA
(1)
210°C/W
Junction Temperature Range −40°C to 100°C
Ambient Temperature Range −40°C to 85°C
Storage Temperature Range −65°C to 150°C
Lead Temp. (Soldering, 10 sec.) 240°C
Human Body Model
(2)
2kV
ESD Rating
Machine Model
(2)
200V
(1) The maximum allowable power dissipation is calculated by using P
DMax
= (T
JMax
− T
A
)/θ
JA
, where T
JMax
is the maximum junction
temperature, T
A
is the ambient temperature, and θ
JA
is the junction-to-ambient thermal resistance of the specified package.
(2) The human body model is a 100pF capacitor discharged through a 1.5kΩ resistor into each pin. The machine model is a 200pF
capacitor discharged directly into each pin.
2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LM2767