Datasheet
Table Of Contents
- FEATURES
- Applications
- DESCRIPTION
- Absolute Maximum Ratings
- Electrical Characteristics
- Typical Performance Characteristics
- Block Diagram
- Theory of Operation
- Application Hints
- SELECTING THE EXTERNAL CAPACITORS
- SELECTING THE OUTPUT CAPACITOR
- SELECTING THE INPUT CAPACITOR
- FEED-FORWARD COMPENSATION
- SELECTING DIODES
- LAYOUT HINTS
- SETTING THE OUTPUT VOLTAGE
- SWITCHING FREQUENCY
- DUTY CYCLE
- INDUCTANCE VALUE
- MAXIMUM SWITCH CURRENT
- CALCULATING LOAD CURRENT
- DESIGN PARAMETERS VSW AND ISW
- THERMAL CONSIDERATIONS
- MINIMUM INDUCTANCE
- INDUCTOR SUPPLIERS
- SHUTDOWN PIN OPERATION
- Application Hints
- Revision History
PACKAGE OPTION ADDENDUM
www.ti.com
1-Nov-2013
Addendum-Page 2
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.