Datasheet
3 2 1 20 19
9 10 11 12 13
4
5
6
7
8
18
17
16
15
14
NC
2OUT
NC
2IN−
NC
NC
1IN−
NC
1IN+
NC
NC
1OUT
NC
NC NC
NC
GND
NC
CC+
V
2IN+
1
2
3
4
8
7
6
5
1OUT
1IN−
1IN+
GND
V
CC
2OUT
2IN−
2IN+
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com
SLOS068S –JUNE 1976–REVISED MAY 2013
Dual Operational Amplifiers
Check for Samples: LM158, LM258, LM258A, LM358, LM358A, LM2904, LM2904V
1
FEATURES
DESCRIPTION
These devices consist of two independent, high-gain
• Wide Supply Ranges
frequency-compensated operational amplifiers
– Single Supply: 3 V to 32 V (26 V for
designed to operate from a single supply over a wide
LM2904)
range of voltages. Operation from split supplies also
– Dual Supplies: ±1.5 V to ±16 V (±13 V for
is possible if the difference between the two supplies
is 3 V to 32 V (3 V to 26 V for the LM2904), and V
CC
LM2904)
is at least 1.5 V more positive than the input
• Low Supply-Current Drain, Independent of
common-mode voltage. The low supply-current drain
Supply Voltage: 0.7 mA Typ
is independent of the magnitude of the supply
• Wide Unity Gain Bandwidth: 0.7MHz
voltage.
• Common-Mode Input Voltage Range Includes
Applications include transducer amplifiers, dc
Ground, Allowing Direct Sensing Near Ground
amplification blocks, and all the conventional
• Low Input Bias and Offset Parameters
operational amplifier circuits that now can be
implemented more easily in single-supply-voltage
– Input Offset Voltage: 3 mV Typ
systems. For example, these devices can be
A Versions: 2 mV Typ
operated directly from the standard 5-V supply used
– Input Offset Current: 2 nA Typ
in digital systems and easily can provide the required
interface electronics without additional ±5-V supplies.
– Input Bias Current: 20 nA Typ
A Versions: 15 nA Typ
• Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: 32 V (26 V for
LM2904)
• Open-Loop Differential Voltage Gain: 100dB
Typ
• Internal Frequency Compensation
• On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise
Noted. On All Other Products, Production
Processing Does Not Necessarily Include
Testing of All Parameters.
LM158, LM158A . . . FK Package
LM158, LM158A . . . JG Package
(Top View)
LM258, LM258A . . . D, DGK, or P Package
LM358 . . . D, DGK, P, PS, or PW Package
LM358A . . . D, DGK, P, or PW Package
LM2904 . . . D, DGK, P, PS, or PW Package
(Top View)
NC − No internal connection
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1976–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.