Datasheet

LM25066I, LM25066IA
www.ti.com
SNVS824C JUNE 2012REVISED MARCH 2013
Table 13. STATUS_TEMPERATURE Definitions (continued)
Bit NAME Meaning Default
2 reserved Not Supported, always 0 0
1 reserved Not Supported, always 0 0
0 reserved Not Supported, always 0 0
STATUS_CML (7Eh)
The STATUS_CML command is a standard PMBus
command that returns the value of a number of flags
related to communication faults. Accesses to this command should use the PMBus
read byte protocol. To clear
bits in this register, a CLEAR_FAULTS command should be issued.
Table 14. STATUS_CML Definitions
Bit NAME Default
7 Invalid or unsupported command received 0
6 Invalid or unsupported data received 0
5 Packet Error Check failed 0
4 Memory Fault Detected Not supported, always 0 0
3 Processor Fault Detected Not supported, always 0 0
2 Reserved, always 0 0
1 Miscellaneous communications fault has occurred 0
0 Other memory or logic fault detected Not supported, always 0 0
STATUS_OTHER (7Fh)
Bit NAME Default
7 Reserved: always 0 0
6 Reserved: always 0 0
5 CB Fault 0
4 Not supported: Always 0 0
3 Not supported: Always 0 0
2 Not supported: Always 0 0
1 Not supported: Always 0 0
0 Not supported: Always 0 0
STATUS_MFR_SPECIFIC (80h)
The STATUS_MFR_SPECIFIC command is a standard PMBus
command that contains manufacturer specific
status information. Accesses to this command should use the PMBus
read byte protocol. To clear bits in this
register, the underlying fault should be removed and a CLEAR_FAULTS command should be issued. The default
loaded status does not create an SMB Alert State.
Table 15. STATUS_MFR_SPECIFIC Definitions
Bit Meaning Default
7 Circuit breaker fault 0
6 Ext. MOSFET shorted fault 0
5 Not Supported, Always 0 0
4 Defaults loaded
(1)
1
3 Not supported: Always 0 0
2 Not supported: Always 0 0
1 Not supported: Always 0 0
0 Not supported: Always 0 0
(1) Bit 4, Defaults loaded, does not set an SMBAlert.
Copyright © 2012–2013, Texas Instruments Incorporated Submit Documentation Feedback 37
Product Folder Links: LM25066I LM25066IA