Datasheet

Q1
R1
R2
R3
To
Load
R
S
CARD EDGE
CONNECTOR
PLUG-IN CARD
V
SYS
GND
OUT
PGD
PWR
TIMER
RETRY
SCL
SMBA
VREF
DIODE
VAUX
SENSE
GATE
VIN
UVLO
OVLO
GND
SDA
CB
FB
CL
VDD
ADD0
ADD1
ADD2
LM25066I/A
LM25066I, LM25066IA
www.ti.com
SNVS824C JUNE 2012REVISED MARCH 2013
Figure 48. Recommended Board Connector Design
PMBus
Command Support
The device features an SMBus interface that allows the use of PMBus
commands to set warn levels, error
masks, and get telemetry on V
IN
, V
OUT
, I
IN
, V
AUX
, and P
IN
. The supported PMBus
commands are shown in
Table 1.
Table 1. Supported PMBus
Commands
Number
Default
Code Name Function R/W Of Data
Value
Bytes
01h OPERATION Retrieves or stores the operation status. R/W 1 80h
03h CLEAR_FAULTS Clears the status registers and re-arms the black box registers Send 0
for updating. Byte
19h CAPABILITY Retrieves the device capability. R 1 B0h
43h VOUT_UV_WARN_LIMIT Retrieves or stores output under-voltage warn limit threshold. R/W 2 0000h
4Fh OT_FAULT_LIMIT Retrieves or stores over-temperature fault limit threshold. R/W 2 0FFFh
(256°C)
51h OT_WARN_LIMIT Retrieves or stores over-temperature warn limit threshold. R/W 2 0FFFh
(256°C)
57h VIN_OV_WARN_LIMIT Retrieves or stores input over-voltage warn limit threshold. R/W 2 0FFFh
58h VIN_UV_WARN_LIMIT Retrieves or stores input under-voltage warn limit threshold. R/W 2 0000h
5Dh IIN_OC_WARN_LIMIT Retrieves or stores input current warn limit threshold (mirror at R/W 2 0FFFh
D3h)
78h STATUS_BYTE Retrieves information about the part operating status. R 1 01h
79h STATUS_WORD Retrieves information about the part operating status. R 2 0801h
7Ah STATUS_VOUT Retrieves information about output voltage status. R 1 00h
7Ch STATUS_INPUT Retrieves information about input status. R 1 10h
7Dh STATUS_TEMPERATURE Retrieves information about temperature status. R 1 00h
7Eh STATUS_CML Retrieves information about communications status. R 1 00h
7Fh STATUS_OTHER Retrieves other status information R 1 00h
80h STATUS_MFR_SPECIFIC Retrieves information about circuit breaker and MOSFET R 1 10h
shorted status.
86h READ_EIN Retrieves energy meter measurement. R 6 00h 00h
00h 00h
00h 00h
Copyright © 2012–2013, Texas Instruments Incorporated Submit Documentation Feedback 31
Product Folder Links: LM25066I LM25066IA