Datasheet

www.ti.com Waveforms
Figure 9 shows the soft-stop. This can be achieved by setting the UVLO voltage between 0.4V and 1.25V.
Conditions:
Input Voltage = 24VDC
Trace:
Output Voltage, Volts/div = 1V
Horizontal Resolution = 0.5 ms/div
Figure 9. Soft Stop
Figure 10. Typical Application Circuit
7
SNVA352C–July 2008–Revised May 2013 AN-1861 LM25037 Evaluation Board
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated