Datasheet

LOGIC
OSC
+
-
TYPE III
COMP
+
-
1.285V/SS
INT REG, EN,UVLO
GNDRT/SYNC
SW
BOOT
VIN
EN
FB
SS
VIN
VOUT
Error Amp.
PWM Cmp.
V
cc
ILimit
50 µA
LM22680
SNVS595K –SEPTEMBER 2008–REVISED APRIL 2013 www.ti.com
SIMPLIFIED BLOCK DIAGRAM
Figure 13. Simplified Block Diagram
Detailed Operating Description
The LM22680 incorporates a voltage mode constant frequency PWM architecture. In addition, input voltage feed-
forward is used to stabilize the loop gain against variations in input voltage. This allows the loop compensation to
be optimized for transient performance. The power MOSFET, in conjunction with the diode, produce a
rectangular waveform at the switch pin, that swings from about zero volts to VIN. The inductor and output
capacitor average this waveform to become the regulator output voltage. By adjusting the duty cycle of this
waveform, the output voltage can be controlled. The error amplifier compares the output voltage with the internal
reference and adjusts the duty cycle to regulate the output at the desired value.
The functional block diagram of the LM22680 is shown in Figure 13 .
6 Submit Documentation Feedback Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM22680