Datasheet

LM22676

LM22676-Q1

www.ti.com

SNVS587K –SEPTEMBER 2008–REVISED APRIL 2013

Figure 18. Current Flow in a Buck Application

Thermal Considerations

The components with the highest power dissipation are the power diode and the power MOSFET internal to the

LM22676 regulator. The easiest method to determine the power dissipation within the LM22676 is to measure

the total conversion losses then subtract the power losses in the diode and inductor. The total conversion loss is

the difference between the input power and the output power. An approximation for the power diode loss is:

where

• V

is the diode voltage drop. (17)

An approximation for the inductor power is:

where

• R

is the DC resistance of the inductor and the 1.1 factor is an approximation for the AC losses. (18)

The regulator has an exposed thermal pad to aid power dissipation. Adding multiple vias under the device to the

ground plane will greatly reduce the regulator junction temperature. Selecting a diode with an exposed pad will

also aid the power dissipation of the diode. The most significant variables that affect the power dissipation of the

regulator are output current, input voltage and operating frequency. The power dissipated while operating near

the maximum output current and maximum input voltage can be appreciable. The junction-to-ambient thermal

resistance of the LM22676 will vary with the application. The most significant variables are the area of copper in

the PC board, the number of vias under the IC exposed pad and the amount of forced air cooling provided. A

large continuous ground plane on the top or bottom PCB layer will provide the most effective heat dissipation.

The integrity of the solder connection from the IC exposed pad to the PC board is critical. Excessive voids will

greatly diminish the thermal dissipation capacity. The junction-to-ambient thermal resistance of the LM22676 SO

PowerPAD package is specified in the Electrical Characteristics table. See application note AN-2020 (SNVA419)

for more information.

Product Folder Links: LM22676 LM22676-Q1