Datasheet

Exposed Pad
Connect to GND
RT/SYNC
3
FB
4
BOOT
1
SS
2
8
SW
7
VIN
6
GND
5
EN
LM22672
SNVS588L –SEPTEMBER 2008–REVISED APRIL 2013 www.ti.com
Connection Diagram
Figure 1. 8-Lead Plastic SO PowerPAD Package
Package Number DDA0008B
PIN DESCRIPTIONS
Pin Name Description Application Information
1 BOOT Bootstrap input Provides the gate voltage for the high side NFET.
2 SS Soft-start input Used to increase soft-start time. See Soft-Start section of data sheet.
3 RT/SYNC Oscillator mode control input Used to control oscillator mode of regulator. See Switching Frequency
Adjustment and Synchronization section of data sheet.
4 FB Feedback input Feedback input to regulator.
5 EN Enable input Used to control regulator start-up and shutdown. See Precision Enable and
UVLO section of data sheet.
6 GND Ground input to regulator; system System ground pin.
common
7 VIN Input voltage Supply input to the regulator.
8 SW Switch output Switching output of regulator.
EP EP Exposed Pad Connect to ground. Provides thermal connection to PCB. See Application
Information.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
2 Submit Documentation Feedback Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM22672