Datasheet
Table Of Contents
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ABSOLUTE MAXIMUM RATINGS
- OPERATING RATINGS
- ELECTRICAL CHARACTERISTICS
- TYPICAL PERFORMANCE CHARACTERISTICS
- BLOCK DIAGRAM
- OPERATION DESCRIPTION
- GENERAL
- PRECISION ENABLE
- PEAK CURRENT MODE CONTROL
- CURRENT LIMIT
- SOFT-START AND VOLTAGE TRACKING
- PRE-BIAS START UP CAPABILITY
- POWER GOOD AND OVER VOLTAGE FAULT HANDLING
- UVLO
- THERMAL PROTECTION
- LIGHT LOAD OPERATION
- Design Guide
- INDUCTOR SELECTION (L)
- OUTPUT CAPACITOR SELECTION (COUT)
- INPUT CAPACITOR SELECTION (CIN)
- SETTING THE OUTPUT VOLTAGE (RFB1, RFB2)
- LOOP COMPENSATION (RC1, CC1)
- AVIN FILTERING COMPONENTS (CF and RF)
- SUB-REGULATOR BYPASS CAPACITOR (CVCC)
- SETTING THE START UP TIME (CSS)
- USING PRECISION ENABLE AND POWER GOOD
- TRACKING AN EXTERNAL SUPPLY
- THERMAL CONSIDERATIONS
- PCB LAYOUT CONSIDERATIONS
- Typical Application Circuit
- Bill of Materials (VIN = 5V, VOUT = 3.3V, IOUTMAX = 3A)
- Bill of Materials (VIN = 3.3V to 5V, VOUT = 1.2V, IOUTMAX = 3A)
- Revision History
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type
Package
Drawing
Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
(mm)
Pin1
Quadrant
LM20123MHE/NOPB HTSSOP PWP 16 250 178.0 12.4 6.95 8.3 1.6 8.0 12.0 Q1
LM20123MHX/NOPB HTSSOP PWP 16 2500 330.0 12.4 6.95 8.3 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 23-Nov-2013
Pack Materials-Page 1