Datasheet
Table Of Contents
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ABSOLUTE MAXIMUM RATINGS
- OPERATING RATINGS
- ELECTRICAL CHARACTERISTICS
- TYPICAL PERFORMANCE CHARACTERISTICS
- BLOCK DIAGRAM
- OPERATION DESCRIPTION
- GENERAL
- PRECISION ENABLE
- PEAK CURRENT MODE CONTROL
- CURRENT LIMIT
- SOFT-START AND VOLTAGE TRACKING
- PRE-BIAS START UP CAPABILITY
- POWER GOOD AND OVER VOLTAGE FAULT HANDLING
- UVLO
- THERMAL PROTECTION
- LIGHT LOAD OPERATION
- Design Guide
- INDUCTOR SELECTION (L)
- OUTPUT CAPACITOR SELECTION (COUT)
- INPUT CAPACITOR SELECTION (CIN)
- SETTING THE OUTPUT VOLTAGE (RFB1, RFB2)
- LOOP COMPENSATION (RC1, CC1)
- AVIN FILTERING COMPONENTS (CF and RF)
- SUB-REGULATOR BYPASS CAPACITOR (CVCC)
- SETTING THE START UP TIME (CSS)
- USING PRECISION ENABLE AND POWER GOOD
- TRACKING AN EXTERNAL SUPPLY
- THERMAL CONSIDERATIONS
- PCB LAYOUT CONSIDERATIONS
- Typical Application Circuit
- Bill of Materials (VIN = 5V, VOUT = 3.3V, IOUTMAX = 3A)
- Bill of Materials (VIN = 3.3V to 5V, VOUT = 1.2V, IOUTMAX = 3A)
- Revision History
PACKAGE OPTION ADDENDUM
www.ti.com
23-Nov-2013
Addendum-Page 2
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.