Datasheet

www.ti.com

LM10011 Control and Design Software

Select the device connected to the USB dongle, in this case, the LM10011 as shown in Figure 5.

Figure 5. Select Device Menu

Once the device is selected, the Host Adapter list will show. The Host Adapter list will display any FT2232

USB dongles connected to the computer. Select the USB dongle that corresponds to the one connected to

the LM10011 evaluation board. This is shown in Figure 6.

Figure 6. Host Adapter List

The Host Adapter list also shows an option for "Design Tool Only /No Hardware". Select this option if you

only want to use the design tool without the LM10011 connected to the computer. This allows the user to

use all of the design features of the GUI without the need for the actual hardware.

SNOU108A–December 2012–Revised April 2013 LM10011 Evaluation Module

Submit Documentation Feedback