Datasheet

www.ti.com LM10011 Control and Design Software
9.7 Block Level Schematic
The included block level schematic shown in Figure 13 shows the present output voltage of the evaluation
board and the current bit setting.
The 6-Bit/4-Bit Control box allows the user to directly enter a VID code. The VID code of the current
margining output will be displayed in this box as well if the Margin Up/Down buttons are toggled. Use the
step spin box to step a single code value up or down. Check the immediate box to allow realtime control
of the output voltage through direct toggling of the VID bits.
Figure 13. Block Level Schematic
13
SNOU108A–December 2012–Revised April 2013 LM10011 Evaluation Module
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated