Datasheet

VDD
IDAC_OUT
GND VIDS
VIDC
VIDB
VIDA
NC
1
3
2
5
4
10
9
8
7
6
DAP
EN
NC
LM10010
SNVS717C –JULY 2011–REVISED MARCH 2013 www.ti.com
Connection Diagram
Figure 1. Top View
WSON-10 3mm x 3mm
0.5mm pitch
Pin Descriptions
Pin No. Name Description
1 GND Ground.
2 IDAC_OUT Output current DAC that connects to the feedback node of the regulator.
3 VDD Positive supply input.
4 EN Precision enable input.
5 NC No Connect.
6 NC No Connect.
7 VIDA VID digital input: Bit 0 when VIDS transitions low; Bit 3 when VID transitions high.
8 VIDB VID digital input: Bit 1 when VIDS transitions low; Bit 4 when VID transitions high.
9 VIDC VID digital input: Bit 2 when VIDS transitions low; Bit 5 when VID transitions high.
10 VIDS VID select line: Transition low selects lower 3 bits, Transition high selects upper 3 bits.
DAP DAP Die Attach Pad. Not electrically connected to device, connect to system ground plane for reduced thermal
resistance.
2 Submit Documentation Feedback Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: LM10010