User's Manual

22
Micro-reader - Reference Guide May ’00
3.2 Timings
*1 If an Interbyte time-out occurs the Micro-reader performs a reset.
3.3 Mechanical Data
Recommended finished pin hole size is 1 mm diameter.
Figure 5: Top, Front and Side View (measurements in mm)
Parameter Typical Maxim Unit
Read Cycle time without synch (no read) 100 105 ms
Read Cycle time with synch (no read)
120 175 ms
Read Cycle time without synch (valid read) 170 175 ms
Read Cycle time with synch (valid read) 190 245 ms
Interbyte time-out for serial communication
10
*1
ms
Parameter Minimum Typical Maximum Unit
Length 37.9 38.3 38.7 mm
Width 28.8 29.3 29.6 mm
Height including pins 12.5 13.5 14.0 mm
Weight 5.0 Grams