Datasheet

LF411-N
SNOSBH6D –APRIL 1998–REVISED MARCH 2013 www.ti.com
Figure 3. PDIP – Top View
See Package Number P0008E
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)
LF411A LF411
Supply Voltage ±22V ±18V
Differential Input Voltage
(2)
±38V ±30V
±19V ±15V
Output Short Circuit Duration Continuous Continuous
TO Package PDIP Package
Power Dissipation
(3) (4)
670 mW 670 mW
T
j
max 150°C 115°C
θ
j
A 162°C/W (Still Air) 120°C/W
65°C/W (400 LF/min Air Flow)
θ
j
C 20°C/W
Operating Temp. Range See
(5)
See
(5)
Storage Temp. Range −65°C≤T
A
≤150°C −65°C≤T
A
≤150°C
Lead Temp. (Soldering, 10 sec.) 260°C 260°C
ESD Tolerance Rating to be determined.
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits.
(2) Unless otherwise specified the absolute maximum negative input voltage is equal to the negative power supply voltage.
(3) For operating at elevated temperature, these devices must be derated based on a thermal resistance of θ
j
A.
(4) Max. Power Dissipation is defined by the package characteristics. Operating the part near the Max. Power Dissipation may cause the
part to operate outside specified limits.
(5) These devices are available in both the commercial temperature range 0°C≤T
A
≤70°C and the military temperature range
−55°C≤T
A
≤125°C. The temperature range is designated by the position just before the package type in the device number. A “C”
indicates the commercial temperature range and an “M” indicates the military temperature range. The military temperature range is
available in the TO package only.
2 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LF411-N