Datasheet

LF353-N

www.ti.com

SNOSBH3F –APRIL 1998–REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1)(2)

Supply Voltage ±18V

Power Dissipation See

(3)

Operating Temperature Range 0°C to +70°C

(MAX) 150°C

Differential Input Voltage ±30V

Input Voltage Range

(4)

±15V

Output Short Circuit Duration Continuous

Storage Temperature Range −65°C to +150°C

Lead Temp. (Soldering, 10 sec.) 260°C

Soldering Information: Dual-In-Line Package Soldering (10 sec.) 260°C

Small Outline Package Vapor Phase (60 sec.) 215°C

Infrared (15 sec.) 220°C

ESD Tolerance

(5)

1000V

D Package TBD

(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state DC and AC electrical

specifications under particular test conditions which ensure specific performance limits. This assumes that the device is within the

Operating Ratings. Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication

of device performance.

(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(3) For operating at elevated temperatures, the device must be derated based on a thermal resistance of 115°C/W typ junction to ambient

for the P package, and 160°C/W typ junction to ambient for the D package.

(4) Unless otherwise specified the absolute maximum negative input voltage is equal to the negative power supply voltage.

(5) Human body model, 1.5 kΩ in series with 100 pF.

Product Folder Links: LF353-N