User manual

www.ti.com LDC1000 Evaluation Module Overview
Figure 2-4. Configuration Section
Saving Device Configuration
1. Click on the "Save" icon in the toolbar.
Figure 2-5. Save Icon
2. Type a name for the file.
Configuring the Device with Configuration File Defaults
1. The GUI puts the device in streaming mode by default. Click on "Stop" in the Streaming Section to
stop streaming.
2. Click on the "Open" icon in the toolbar.
Figure 2-6. Open Icon
3. Select the configuration file.
5
SNAU150–September 2013 Quick Start Guide LDC1000 Evaluation Module
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated