User manual

LDC1000 Evaluation Module Overview

www.ti.com

Reloading the Device

If the EVM is disconnected from the host at any time, simply reconnect the device and the GUI will

automatically discover and re-establish the streaming abilities with the device.

Configuring the Device Manually

1. The GUI puts the device in streaming mode by default. Click on "Stop" in the Streaming Section to

stop streaming.

Figure 2-2. Stop Streaming

2. Click on the "Configuration Section" icon in the main window toolbar.

Figure 2-3. Configuration Section Icon

3. Select the parameter to change. When entering the comparator thresholds, press ENTER to confirm

the change. Changes are applied immediately.

Quick Start Guide LDC1000 Evaluation Module SNAU150–September 2013

Submit Documentation Feedback