User manual

Data Streaming

www.ti.com

Figure 3-3. Register Settings

Double-click on a register in the table to read/write. If a register is read only, the selected register is read

immediately and the table value updated. If the register is read/write, a dialog pops up and the user can

choose a new register value. If the value is not changed, it will default to a read.

Figure 3-4. Read/Write Register Dialog

Press “Read All” to refresh all configuration, status, and data.

Press “Restore Defaults” to write values from the default column (if they exist) to the current register value.

3.10 Data Streaming

Data is streamed from the EVM to the GUI when streaming is started. The sampling rate of the EVM and

the number of samples to plot can be configured.

Inductive Sensing GUI User Guide SNAU150–September 2013

Submit Documentation Feedback