Datasheet

Control Registers and Control Packets

www.ti.com

20.3.1.83 DMA Memory Protection Region 6 Start Address Register (DMAMPR6S)

Figure 20-101. DMA Memory Protection Region 6 Start Address Register (DMAMPR6S) [offset =

1F0h]

31 0

STARTADDRESS

R/WP-0

LEGEND: R/W = Read/Write; WP = Write in privilege mode only; -n = value after reset

Table 20-89. DMA Memory Protection Region 6 Start Address Register (DMAMPR6S) Field

Descriptions

Bit Field Description

31-0 STARTADDRESS Start Address defines the address at which the region begins.

20.3.1.84 DMA Memory Protection Region 6 End Address Register (DMAMPR6E)

Figure 20-102. DMA Memory Protection Region 6 End Address Register (DMAMPR6E) [offset =

1F4h]

31 0

ENDADDRESS

R/WP-0

LEGEND: R/W = Read/Write; WP = Write in privilege mode only; -n = value after reset

Table 20-90. DMA Memory Protection Region 6 End Address Register (DMAMPR6E) Field

Descriptions

Bit Field Description

31-0 ENDADDRESS End Address defines the address at which the region ends. The end address usually is larger than the

start address for this region; otherwise the region will wrap around at the end of the address space.

756

Direct Memory Access Controller (DMA) Module SPNU562–May 2014

Submit Documentation Feedback