Datasheet
www.ti.com
Control Registers and Control Packets
20.3.1.81 DMA Memory Protection Region 5 Start Address Register (DMAMPR5S)
Figure 20-99. DMA Memory Protection Region 5 Start Address Register (DMAMPR5S) [offset =
1E8h]
31 0
STARTADDRESS
R/WP-0
LEGEND: R/W = Read/Write; WP = Write in privilege mode only; -n = value after reset
Table 20-87. DMA Memory Protection Region 1 Start Address Register (DMAMPR1S) Field
Descriptions
Bit Field Description
31-0 STARTADDRESS Start Address defines the address at which the region begins.
20.3.1.82 DMA Memory Protection Region 5 End Address Register (DMAMPR5E)
Figure 20-100. DMA Memory Protection Region 5 End Address Register (DMAMPR5E) [offset =
1ECh]
31 0
ENDADDRESS
R/WP-0
LEGEND: R/W = Read/Write; WP = Write in privilege mode only; -n = value after reset
Table 20-88. DMA Memory Protection Region 1 End Address Register (DMAMPR1E) Field
Descriptions
Bit Field Description
31-0 ENDADDRESS End Address defines the address at which the region ends. The end address usually is larger than the
start address for this region; otherwise the region will wrap around at the end of the address space.
755
SPNU562–May 2014 Direct Memory Access Controller (DMA) Module
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated