Datasheet
PMM Registers
www.ti.com
5.4.10 Logic Power Domain PD6 Power Status Register (LOGICPDPWRSTAT4)
This is a read-only register. All writes are ignored.
The default values of the control fields are determined by the device reset configuration word stored in the
TI-OTP region of flash bank 0.
Figure 5-12. Logic Power Domain PD6 Power Status Register (LOGICPDPWRSTAT4) (offset = 50h)
31 25 24 23 17 16
LOGIC IN MEM IN
Reserved Reserved
TRANS4 TRANS4
R-0 R-n R-0 R-n
15 9 8 7 2 1 0
DOMAIN LOGICPDPWR
Reserved Reserved
ON4 STAT4
R-0 R-n R-0 R-n
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 5-11. Logic Power Domain PD6 Power Status Register (LOGICPDPWRSTAT4) Field
Descriptions
Bit Field Value Description
31-25 Reserved 0 Read returns 0. Writes have no effect.
24 LOGIC IN TRANS4 Logic in transition status for power domain PD6.
Read in User and Privileged Mode.
0 Logic in power domain PD6 is in the steady Active or OFF state
1 Logic in power domain PD6 is in the process of power-down/up
13-17 Reserved 0 Read returns 0. Writes have no effect.
16 MEM IN TRANS4 Memory in transition status for power domain PD6.
Read in User and Privileged Mode.
0 Memory in power domain PD6 is in the steady Active or OFF state
1 Memory in power domain PD6 is in the process of power-down/up
15-9 Reserved 0 Read returns 0. Writes have no effect.
8 DOMAIN ON4 Current state of power domain PD6. The default value of this field is controlled by the
device reset configuration word in the TI-OTP region of flash bank 0.
Read in User and Privileged Mode.
0 Power domain PD6 is in the OFF state
1 Power domain PD6 is in the Active state
7-2 Reserved 0 Read returns 0. Writes have no effect.
1-0 LOGICPDPWR STAT4 Logic power domain PD6 power state. The default value of this field is controlled by the
device reset configuration word in the TI-OTP region of flash bank 0.
Read in User and Privileged Mode.
0 Logic power domain PD6 is switched OFF
1h Logic power domain PD6 is in Idle state
2h Reserved
3h Logic power domain PD6 is in Active state
280
Power Management Module (PMM) SPNU562–May 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated