Datasheet

PMM Registers

www.ti.com

5.4.2 Logic Power Domain Control Register (LOGICPDPWRCTRL1)

The default values of the control fields are determined by the device reset configuration word stored in the

TI-OTP region of flash bank 0.

Figure 5-4. Logic Power Domain Control Register (LOGICPDPWRCTRL1) (offset = 04h)

31 28 27 24 23 16

Reserved LOGICPDON4 Reserved

R-0 R/WP-n R-0

15 0

Reserved

R-0

LEGEND: R/W = Read/Write; R = Read only; WP = Write in privileged mode only; -n = value after reset

Table 5-3. Logic Power Domain Control Register (LOGICPDPWRCTRL1) Field Descriptions

Bit Field Value Description

31-28 Reserved 0 Read returns 0. Writes have no effect.

27-24 LOGICPDON4 Read in User and Privileged Mode. Write in Privileged Mode only.

Ah Read: Power domain PD6 is in OFF state.

Write: Power domain PD6 is commanded to switch to OFF state.

9h Reserved

Any other value Read: Power domain PD6 is in Active state.

Write: Power domain PD6 is commanded to switch to Active state.

23-0 Reserved 0 Read returns 0. Writes have no effect.

272

Power Management Module (PMM) SPNU562–May 2014

Submit Documentation Feedback