Datasheet

System and Peripheral Control Registers

www.ti.com

2.5.2.11 Die Identification Register Upper Word (DIEIDH_REG1)

This register is shown in Figure 2-69 and described in Table 2-82.

Figure 2-69. Die Identification Register, Upper Word (DIEIDH_REG1) [offset = F4h]

31 0

DIEIDH

R-X

LEGEND: R/W = Read/Write; R = Read only; -n = value after reset; -X = Value unchanged after reset

Table 2-82. Die Identification Register, Upper Word (DIEIDH_REG1) Field Descriptions

Bit Field Description

31-0 DIEIDH(63-32) This read-only register contains the upper word (63:32) of the die ID information.

2.5.2.12 Die Identification Register Lower Word (DIEIDL_REG2)

This register is shown in Figure 2-70 and described in Table 2-83.

Figure 2-70. Die Identification Register, Lower Word (DIEIDL_REG2) [offset = F8h]

31 0

DIEIDL2

R-X

LEGEND: R/W = Read/Write; R = Read only; -n = value after reset; -X = Value unchanged after reset

Table 2-83. Die Identification Register, Lower Word (DIEIDL_REG2) Field Descriptions

Bit Field Description

31-0 DIEIDL2(95-64) This read-only register contains the lower word (95:64) of the die ID information.

2.5.2.13 Die Identification Register Upper Word (DIEIDH_REG3)

This register is shown in Figure 2-71 and described in Table 2-84.

Figure 2-71. Die Identification Register, Upper Word (DIEIDH_REG3) [offset = FCh]

31 0

DIEIDH2

R-X

LEGEND: R/W = Read/Write; R = Read only; -n = value after reset; -X = Value unchanged after reset

Table 2-84. Die Identification Register, Upper Word (DIEIDH_REG3) Field Descriptions

Bit Field Description

31-0 DIEIDH2(127-96) This read-only register contains the upper word (127:97) of the die ID information.

202

Architecture SPNU562–May 2014

Submit Documentation Feedback