Datasheet
www.ti.com
Control Registers
35.3.1 DMM Global Control Register (DMMGLBCTRL)
With this register the basic operation of the module is selected.
Figure 35-7. DMM Global Control Register (DMMGLBCTRL) [offset = 00h]
31 25 24
Reserved BUSY
R-0 R-0
23 19 18 17 16
Reserved CONTCLK COS RESET
R-0 R/WP-0 R/WP-0 R/WP-0
15 11 10 9 8
Reserved DDM_WIDTH TM_DDM
R-0 R/WP-0 R/WP-0
7 4 3 0
Reserved ON/OFF
R-0 R/WP-5h
LEGEND: R/W = Read/Write; R = Read only; WP = Write in privileged mode only; -n = value after reset
Table 35-7. DMM Global Control Register (DMMGLBCTRL) Field Descriptions
Bit Field Value Description
31-25 Reserved 0 Reads returns 0. Writes have no effect.
24 BUSY Busy indicator.
0 The DMM does not currently receive data and has no data in its internal buffers, which
needs to be transferred.
1 The module is currently receiving data, or has data in its internal buffers
23-19 Reserved 0 Reads returns 0. Writes have no effect.
18 CONTCLK Continuous DMMCLK input.
User and privilege mode read, privilege mode write:
0 DMMCLK is expected to be suspended between two packets.
1 DMMCLK is expected to be free running between packets.
17 COS Continue on suspend. Influences behavior of module while in debug mode. In all cases the
corresponding interrupt will be set.
User and privilege mode (read):
0 Packets will not be received during debug mode. Before entering debug mode, the ongoing
reception of a packet will be finished and the value will be written to the destination.
1 Continue receiving packets and update destination, while in debug mode
Privilege mode (write):
0 Disable data reception while in debug mode
1 Enable data reception while in debug mode
16 RESET Reset. This bit resets the state machine and the registers to its reset value, except the
RESET bit itself. It must be cleared by writing to it.
User and privilege mode (read):
0 No reset of DMM module
1 Reset of DMM module
Privilege mode (write):
0 No reset of DMM module
1 Reset DMM module to its reset state
15-11 Reserved 0 Reads returns 0. Writes have no effect.
1833
SPNU562–May 2014 Data Modification Module (DMM)
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated