Datasheet

194

RM57L843

SPNS215C –FEBRUARY 2014–REVISED JUNE 2016

www.ti.com

Submit Documentation Feedback

Product Folder Links: RM57L843

Table 7-34. MIBSPI5 Event Trigger Hookup (continued)

EVENT9 1010 N2HET1[10]

EVENT10 1011 N2HET1[12]

EVENT11 1100 N2HET1[14]

EVENT12 1101 N2HET1[16]

EVENT13 1110 N2HET1[18]

EVENT14 1111 Intern Tick counter

NOTE

For N2HET1 trigger sources, the connection to the MibSPI5 module trigger input is made

from the input side of the output buffer (at the N2HET1 module boundary). This way, a

trigger condition can be generated even if the N2HET1 signal is not selected to be output on

the pad.

NOTE

For GIOx trigger sources, the connection to the MibSPI5 module trigger input is made from

the output side of the input buffer. This way, a trigger condition can be generated either by

selecting the GIOx pin as an output pin + selecting the pin to be a GIOx pin, or by driving the

GIOx pin from an external trigger source. If the mux control module is used to select different

functionality instead of the GIOx signal, then care must be taken to disable GIOx from

triggering MibSPI5 transfers; there is no multiplexing on the input connections.