Datasheet

SCI/LIN Control Registers

www.ti.com

Table 28-18. SCI Set Interrupt Level Register (SCISETINTLVL) Field Descriptions (continued)

Bit Field Value Description

0 SET BRKDT INT LVL Set break-detect interrupt level. This bit is effective in SCI-compatible mode only.

0 Read: The interrupt level is mapped to the INT0 line.

Write: No effect.

1 Read or write: The interrupt level is mapped to the INT1 line.

1404

Serial Communication Interface (SCI)/Local Interconnect Network (LIN) SPNU562–May 2014

Module

Submit Documentation Feedback