Datasheet

DCAN Control Registers

www.ti.com

Table 26-7. CAN Control Register (DCAN CTL) Field Descriptions (continued)

Bit Field Value Description

3 EIE Error Interrupt Enable

0 Disabled - PER, BOff and EWarn bits cannot generate an interrupt.

1 Enabled - PER, BOff and EWarn bits can generate an interrupt at DCAN0INT line and affect the

Interrupt Register.

2 SIE Status Change Interrupt Enable

0 Disabled - WakeUpPnd, RxOk, TxOk and LEC bits cannot generate an interrupt.

1 Enabled - WakeUpPnd, RxOk, TxOk and LEC can generate an interrupt at DCAN0INT line and

affect the Interrupt Register.

1 IE0 Interrupt line 0 Enable

0 Disabled - Module Interrupt DCAN0INT is always low.

1 Enabled - Interrupts will assert line DCAN0INT to one; line remains active until pending

interrupts are processed.

0 Init Initialization

0 Normal Operation

1 Initialization mode is entered

1184

Controller Area Network (DCAN) Module SPNU562–May 2014

Submit Documentation Feedback