Datasheet

ADC Registers

www.ti.com

22.3.54 ADC Magnitude Compare Interrupt Control Registers (ADMAGINTxCR)

ADC Magnitude Compare Interrupt Control Registers (ADMAGINTxCR) are shown in Figure 22-83 and

Figure 22-84, and described in Table 22-60. As shown, the format of the ADMAGINTxCR is different

based on whether the ADC module is configured to be a 12-bit or a 10-bit ADC module. The ADC module

supports up to three magnitude compare interrupts. These registers are at offset addresses 128h, 130h,

and 138h.

Figure 22-83. 12-bit ADC Magnitude Compare Interrupt Control Registers (ADMAGINTxCR)

[offset = 128h-138h]

31 28 27 16

Reserved MAG_THRx

R-0 R/W-0

15 14 13 12 8

CHN_THR_ CMP_GE_LTx Reserved COMP_CHIDx

COMPx

R/W-0 R/W-0 R-0 R/W-0

7 5 4 0

Reserved MAG_CHIDx

R-0 R/W-0

LEGEND: R/W = Read/Write; R = Read only; -n = value after reset

Figure 22-84. 10-bit ADC Magnitude Compare Interrupt Control Registers (ADMAGINTxCR)

[offset = 128h-138h]

31 30 26 25 16

Rsvd MAG_CHIDx MAG_THRx

R-0 R/W-0 R/W-0

15 13 12 8

Reserved COMP_CHIDx

R-0 R/W-0

7 2 1 0

Reserved CHN_THR_ CMP_GE_LTx

COMPx

R-0 R/W-0 R/W-0

LEGEND: R/W = Read/Write; R = Read only; -n = value after reset

914

Analog To Digital Converter (ADC) Module SPNU562–May 2014

Submit Documentation Feedback