Datasheet

www.ti.com

FlexRay Module Registers

Table 26-107. Status Interrupt Enable Set/Reset Register (SIES, SIER) Field Descriptions (continued)

Bit Field Value Description

9 TI1E Timer interrupt 1 enable.

0 Interrupt disabled

1 Timer interrupt 1 enabled

8 TI0E Timer interrupt 0 enable.

0 Interrupt disabled

1 Timer interrupt 0 enabled

7 NMVCE Network management vector changed interrupt enable.

0 Interrupt disabled

1 Network management vector changed interrupt enabled

6 RFCLE Receive FIFO full interrupt enable.

0 Interrupt disabled

1 Receive FIFO overrun interrupt enabled

5 RFNEE Receive FIFO not empty interrupt enable.

0 Interrupt disabled

1 Receive FIFO not empty interrupt enabled

4 RXIE Receive interrupt enable.

0 Interrupt disabled

1 Receive interrupt enabled

3 TXIE Transmit interrupt enable.

0 Interrupt disabled

1 Transmit interrupt enabled

2 CYCSE Cycle start interrupt enable.

0 Interrupt disabled

1 Cycle start interrupt enabled

1 CASE Collision avoidance symbol interrupt enable.

0 Interrupt disabled

1 Collision Avoidance symbol interrupt enabled

0 WSTE Wakeup status interrupt enable.

0 Interrupt disabled

1 Wakeup status interrupt enabled

1295

SPNU563–May 2014 FlexRay Module

Submit Documentation Feedback