Datasheet

www.ti.com

FlexRay Module Registers

Table 26-106. Error Interrupt Set/Reset Register (EIES, EIER) Field Descriptions (continued)

Bit Field Value Description

7 RFOE Receive FIFO overrun interrupt enable.

0 Interrupt disabled

1 Receive FIFO overrun interrupt enabled

6 UCREE Uncorrectable RAM error interrupt enable. An uncorrectable RAM error can be caused by:

• an ECC single bit error, if ECC single bit error correction is disabled

• a double bit (ECC) error

0 Interrupt disabled

1 Uncorrectable RAM error interrupt enabled

5 CCLE CHI command locked interrupt enable.

0 Interrupt disabled

1 CHI command locked interrupt enabled

4 CCFE Clock correction failure interrupt enable.

0 Interrupt disabled

1 Clock correction failure interrupt enabled

3 SFOE Sync frame overflow interrupt enable.

0 Interrupt disabled

1 Sync frame overflow interrupt enabled

2 SFBME Sync frames below minimum interrupt enable.

0 Interrupt disabled

1 Sync frames below minimum interrupt enabled

1 CNAE Command not Accepted interrupt enable.

0 Interrupt disabled

1 Command not valid interrupt enabled

0 PEMCE POC error mode changed interrupt enable.

0 Interrupt disabled

1 Protocol error mode changed interrupt enabled

1293

SPNU563–May 2014 FlexRay Module

Submit Documentation Feedback