Datasheet

FlexRay Module Registers www.ti.com
Figure 26-80. Enable Transfer on Event to System Memory Set 4 (ETESMS4) [offset_TU = D8h]
31 16
ETESMS4(31-16)
R/S-0
15 0
ETESMS4(15-0)
R/S-0
LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset
Table 26-66. Enable Transfer on Event to System Memory Set 4 Field Descriptions
Bit Field Value Description
31-0 ETESMS4(31-0) Enable Transfer on Event to System Memory Set 4. The register bits 0 to 31 correspond to
message buffers 96 to 127. Each bit of the register enables a message buffer transfer on event to
the system memory:
0 Transfer on event is disabled.
1 Transfer on event is enabled.
Figure 26-81. Enable Transfer on Event to System Memory Reset 4 (ETESMR4) [offset_TU = DCh]
31 16
ETESMR4(31-16)
R/C-0
15 0
ETESMR4(15-0)
R/C-0
LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset
Table 26-67. Enable Transfer on Event to System Memory Reset 4 (ETESMR4) Field Descriptions
Bit Field Description
31-0 ETESMR4(31-0) Enable Transfer on Event to System Memory Reset 4. The ETESMR4 register shows the identical
values to ETESMS4 if read.
1252
FlexRay Module SPNU563–May 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated