Datasheet

www.ti.com FlexRay Module Registers
Figure 26-78. Enable Transfer on Event to System Memory Set 3 (ETESMS3) [offset_TU = D0h]
31 16
ETESMS3(31-16)
R/S-0
15 0
ETESMS3(15-0)
R/S-0
LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset
Table 26-64. Enable Transfer on Event to System Memory Set 3 Field Descriptions
Bit Field Value Description
31-0 ETESMS3(31-0) Enable Transfer on Event to System Memory Set 3. The register bits 0 to 31 correspond to
message buffers 64 to 95. Each bit of the register enables a message buffer transfer on event to
the system memory:
0 Transfer on event is disabled.
1 Transfer on event is enabled.
Figure 26-79. Enable Transfer on Event to System Memory Reset 3 (ETESMR3) [offset_TU = D4h]
31 16
ETESMR3(31-16)
R/C-0
15 0
ETESMR3(15-0)
R/C-0
LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset
Table 26-65. Enable Transfer on Event to System Memory Reset 3 (ETESMR3) Field Descriptions
Bit Field Description
31-0 ETESMR3(31-0) Enable Transfer on Event to System Memory Reset 3. The ETESMR3 register shows the identical
values to ETESMS3 if read.
1251
SPNU563–May 2014 FlexRay Module
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated