Datasheet

www.ti.com

FlexRay Module Registers

Figure 26-70. Trigger Transfer to Communication Controller Set 3 (TTCCS3) [offset_TU = B0h]

31 16

TTCCS3(31-16)

R/S-0

15 0

TTCCS3(15-0)

R/S-0

LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset

Table 26-56. Trigger Transfer to Communication Controller Set 3 (TTCCS3) Field Descriptions

Bit Field Value Description

31-0 TTCCS3(31-0) Trigger Transfer to Communication Controller Set 3. The register bits 0 to 31 correspond to

message buffers 64 to 95. Each bit of the register controls the message buffer transfer to the

communication controller in the following manner:

0 No transfer request.

1 Transfer based on address defined in TBA.

Figure 26-71. Trigger Transfer to Communication Controller Reset 3 (TTCCR3) [offset_TU = B4h]

31 16

TTCCR3(31-16)

R/C-0

15 0

TTCCR3(15-0)

R/C-0

LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset

Table 26-57. Trigger Transfer to Communication Controller Reset 3 (TTCCR3) Field Descriptions

Bit Field Description

31-0 TTCCR3(31-0) Trigger Transfer to Communication Controller Reset 3. The TTCCR3 register shows the identical values

to TTCCS3 if read.

1247

SPNU563–May 2014 FlexRay Module

Submit Documentation Feedback