Datasheet

FlexRay Module Registers www.ti.com
Figure 26-68. Trigger Transfer to Communication Controller Set 2 (TTCCS2) [offset_TU = A8h]
31 16
TTCCS2(31-16)
R/S-0
15 0
TTCCS2(15-0)
R/S-0
LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset
Table 26-54. Trigger Transfer to Communication Controller Set 2 (TTCCS2) Field Descriptions
Bit Field Value Description
31-0 TTCCS2(31-0) Trigger Transfer to Communication Controller Set 2. The register bits 0 to 31 correspond to
message buffers 32 to 63.
0 No transfer request.
1 Transfer based on address defined in TBA.
Figure 26-69. Trigger Transfer to Communication Controller Reset 2 (TTCCR2) [offset_TU = ACh]
31 16
TTCCR2(31-16)
R/C-0
15 0
TTCCR2(15-0)
R/C-0
LEGEND: R/W = Read/Write; R = Read only; C = Clear; S = Set; -n = value after reset
Table 26-55. Trigger Transfer to Communication Controller Reset 2 (TTCCR2) Field Descriptions
Bit Field Description
31-0 TTCCR2(31-0) Trigger Transfer to Communication Controller Reset 2. The TTCCR2 register shows the identical values
to TTCCS2 if read.
1246
FlexRay Module SPNU563–May 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated