Datasheet

15
CC1350
www.ti.com SWRS183 –JUNE 2016
Submit Documentation Feedback
Product Folder Links: CC1350
SpecificationsCopyright © 2016, Texas Instruments Incorporated
1-Mbps GFSK (Bluetooth low energy) – RX (continued)
Measured on the TI CC1350_7XD-Dual Band reference design with T
c
= 25°C, V
DDS
= 3.0 V, f
RF
= 2440 MHz, unless
otherwise noted. All tests with Bluetooth low energy PHY (1 Mbps), 37 byte payload unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Spurious emissions,
1 to 12.75 GHz
Conducted measurement in a 50-Ω single-ended
load. Suitable for systems targeting compliance
with EN 300 328, EN 300 440 class 2, FCC
CFR47, Part 15 and ARIB STD-T-66
–65 dBm
RSSI dynamic range 70 dB
RSSI accuracy ±4 dB
(1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan).
5.9 1-Mbps GFSK (Bluetooth low energy) – TX
Measured on the TI CC1350_7XD-Dual Band reference design with T
c
= 25°C, V
DDS
= 3.0 V, f
RF
= 2440 MHz, unless
otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Output power, boost mode
Differential mode, delivered to a single-ended 50-Ω load
through a balun.
VDDR = 1.95 V
Minimum VDDS for boost mode is 2.1 V.
9 dBm
Output power
Differential mode, delivered to a single-ended 50-Ω load
through a balun.
5 dBm
Output power, lowest setting Delivered to a single-ended 50-Ω load through a balun -21 dBm
Spurious emission conducted
measurement
(1)
f < 1 GHz, outside restricted bands –59
dBm
f < 1 GHz, restricted bands ETSI -55
f < 1 GHz, restricted bands FCC –61
f > 1 GHz, including harmonics –47
5.10 PLL Parameters
Measured on the Texas Instruments CC1310EM-7XD-7793 reference design with T
c
= 25°C, V
DDS
= 3.0 V
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Phase noise in the 868-MHz band
±100-kHz offset –101
dBc/Hz
±200-kHz offset –108
±400-kHz offset –115
±1000-kHz offset –124
±2000-kHz offset –131
±10000-kHz offset –140
Phase noise in the 915-MHz band
±100-kHz offset –98
dBc/Hz
±200-kHz offset –106
±400-kHz offset –114
±1000-kHz offset –122
±2000-kHz offset –130
±10000-kHz offset –140