Datasheet

11
CC1350
www.ti.com SWRS183 –JUNE 2016
Submit Documentation Feedback
Product Folder Links: CC1350
SpecificationsCopyright © 2016, Texas Instruments Incorporated
(1) For more information, refer to CC1350 SimpleLink Wireless MCU Silicon Errata.
5.5 RF Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER MIN TYP MAX UNIT
Frequency bands
(1)
(287) (351)
MHz
(359) (439)
(431) (527)
(718) (878)
861 1054
2152 2635
5.6 Receive (RX) Parameters, Sub-1 GHz
Measured on the Texas Instruments CC1350_7XD-Dual Band reference design with T
c
= 25°C, V
DDS
= 3.0 V, DC-DC
enabled, f
RF
= 868 MHz, unless otherwise noted. All measurements are performed at the antenna input with a combined RX
and TX path.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Data rate 50 kbps
Data rate offset tolerance,
IEEE 802.15.4g PHY
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10
–3
1600 ppm
Data rate step size 1.5 bps
Digital channel filter programmable
bandwidth
Using VCO divide by 5 setting 40 4000 kHz
Receiver sensitivity, 50 kbps
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10
–2
868 MHz and 915 MHz
-109 dBm
Receiver sensitivity, 50 kbps
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10
–2
868 MHz and 915 MHZ.
Measured on CC1310EM-7XD-7793
-110 dBm
Receiver saturation
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10
–2
10 dBm
Selectivity, ±200 kHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
44, 47 dB
Selectivity, ±400 kHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
48, 53 dB
Blocking ±1 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
59, 62 dB
Blocking ±2 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
64, 65 dB
Blocking ±5 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
67, 68 dB
Blocking ±10 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
76, 76 dB