Datasheet

23
CC1310
www.ti.com SWRS181C –SEPTEMBER 2015–REVISED OCTOBER 2016
Submit Documentation Feedback
Product Folder Links: CC1310
SpecificationsCopyright © 2015–2016, Texas Instruments Incorporated
5.17 DC Characteristics
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
T
A
= 25°C, V
DDS
= 1.8 V
GPIO VOH at 8-mA load IOCURR = 2, high-drive GPIOs only 1.32 1.54 V
GPIO VOL at 8-mA load IOCURR = 2, high-drive GPIOs only 0.26 0.32 V
GPIO VOH at 4-mA load IOCURR = 1 1.32 1.58 V
GPIO VOL at 4-mA load IOCURR = 1 0.21 0.32 V
GPIO pullup current Input mode, pullup enabled, Vpad = 0 V 71.7 µA
GPIO pulldown current Input mode, pulldown enabled, Vpad = VDDS 21.1 µA
GPIO high/low input transition, no hysteresis
IH = 0, transition between reading 0 and reading
1
0.88 V
GPIO low-to-high input transition, with hysteresis IH = 1, transition voltage for input read as 0 → 1 1.07 V
GPIO high-to-low input transition, with hysteresis IH = 1, transition voltage for input read as 1 → 0 0.74 V
GPIO input hysteresis
IH = 1, difference between 0 → 1
and 1 → 0 voltage transition points
0.33 V
T
A
= 25°C, V
DDS
= 3.0 V
GPIO VOH at 8-mA load IOCURR = 2, high-drive GPIOs only 2.68 V
GPIO VOL at 8-mA load IOCURR = 2, high-drive GPIOs only 0.33 V
GPIO VOH at 4-mA load IOCURR = 1 2.72 V
GPIO VOL at 4-mA load IOCURR = 1 0.28 V