Datasheet

17
CC1310
www.ti.com SWRS181C –SEPTEMBER 2015–REVISED OCTOBER 2016
Submit Documentation Feedback
Product Folder Links: CC1310
SpecificationsCopyright © 2015–2016, Texas Instruments Incorporated
Receive (RX) Parameters, 861 MHz to 1054 MHz (continued)
Measured on the Texas Instruments CC1310EM-7XD-7793 reference design with T
c
= 25°C, V
DDS
= 3.0 V, DC-DC enabled,
f
RF
= 868 MHz, unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX
path.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Selectivity, ±100 kHz, long-range mode
625 bps
Wanted signal 3 dB above sensitivity limit. 10 ksym/s,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10
–2
52, 52 dB
Selectivity, ±200 kHz, long-range mode
625 bps
Wanted signal 3 dB above sensitivity limit. 10 ksym/s,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10
–2
61, 61 dB
Blocking ±1 MHz, long-range mode
625 bps
Wanted signal 3 dB above sensitivity limit. 10 ksym/s,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10
–2
73, 77 dB
Blocking ±2 MHz, long-range mode
625 bps
Wanted signal 3 dB above sensitivity limit. 10 ksym/s,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10
–2
79, 79 dB
Blocking ±10 MHz, long-range mode
625 bps
Wanted signal 3 dB above sensitivity limit. 10 ksym/s,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10
–2
91, 91 dB
Receiver sensitivity, OOK 4.8 kbps
4.8 kbps, OOK, 40-kHz RX bandwidth, BER = 10
–2
868 MHz and 915 MHz
–115 dBm
5.7 Receive (RX) Parameters, 431 MHz to 527 MHz
Measured on the Texas Instruments CC1310EM-7XD-4251 reference design with T
c
= 25°C, V
DDS
= 3.0 V, DC-DC enabled,
f
RF
= 433.92 MHz, unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX
path. This frequency band is supported on die Revision B and later.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Receiver sensitivity, 50 kbps
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10
–2
–110 dBm
Receiver saturation
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10
–2
10 dBm
Selectivity, ±200 kHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
40, 42 dB
Selectivity, ±400 kHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
42, 50 dB
Blocking ±1 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
53, 58 dB
Blocking ±2 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
59, 60 dB
Blocking ±10 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
74, 74 dB
Spurious emissions 1 GHz to 13 GHz
(VCO leakage at 3.5 GHz) and 30 MHz
to 1 GHz
Radiated emissions measured according to ETSI EN
300 220
–74 dBm
Image rejection (image compensation
enabled, the image compensation is
calibrated in production)
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10
–2
43 dB