Datasheet

ISO1176
SLLS897D –MARCH 2008–REVISED MARCH 2010 www.ti.com
REVISION HISTORY
Changes from Original (March 2008) to Revision A Page
• Added the Bus-Pin ESD Protection bullet and sub bullets to the Features List ................................................................... 1
• Added 3.3-V Inputs are 5-V Tolerant to the Features List .................................................................................................... 1
• Added Bus pins to GND1 and Bus pins to GND2 to the ESD information of the Abs Max Ratings table ........................... 2
• Added the APPLICATION INFORMATION section ............................................................................................................ 20
Changes from Revision A (May 2008) to Revision B Page
• Changed L(IO1), Minimum air gap (Clearance) in the PACKAGE CHARACTERISTICS table From: MIN = 7.7mm
To: 8.34mm. ........................................................................................................................................................................ 18
Changes from Revision B (June 2008) to Revision C Page
• Changed the text in the second paragraph of the DESCRIPTON From: whenever the driver is disabled or V
CC2
= 0
To: allowing up to 160 nodes. ............................................................................................................................................... 1
Changes from Revision C (October 2008) to Revision D Page
• Added 560-Vpeak V
IORM
to the first Features List ................................................................................................................ 1
• Added UL 1577, IEC 60747-5-2 (VDE 0884, Rev. 2), to the Features List .......................................................................... 1
• Added Input pulse width MIN = 10 ns to the RECOMMENDED OPERATING CONDITIONS table .................................... 2
• Added the CSA column to the Regulatory Information table .............................................................................................. 19
• Changed the ISO1176 “Sticky Bit” Issue section ................................................................................................................ 21
22 Submit Documentation Feedback Copyright © 2008–2010, Texas Instruments Incorporated
Product Folder Link(s) :ISO1176