Datasheet

Introduction and Overview

www.ti.com

2 Introduction and Overview

2.1 INA827

The INA827 is a low-power, wide-supply voltage instrumentation amplifier that can operate in both single-

and dual-supply configurations. A single external resistor sets the gain from 5 to 1000. The device

operates with a supply voltage between 2.7 V and 36 V, and is available in an MSOP-8 package.

2.2 INA827EVM

The INA827EVM is intended to provide basic functional evaluation of the INA827. It provides the following

features:

• Intuitive evaluation with the silkscreen schematic

• Easy access to nodes with surface-mount test points

• Advanced evaluation with two prototype areas

• Reference voltage source flexibility

• Convenient input and output filtering

The schematic and component sides of the EVM are shown in Figure 1 and Figure 2, respectively.

NOTE: Board layouts are not to scale. These figures are intended to show how the board is laid out;

they are not intended to be used for manufacturing INA827EVM PCBs.

Figure 1. INA827EVM Schematic Side

INA827EVM SBOU121–June 2012

Submit Documentation Feedback