Datasheet

INA3221EVM Software Setup

www.ti.com

4.2 Software Installation

The INA3221EVM software is included on the CD shipped with the EVM kit. It is also available through the

INA3221EVM product folder on www.ti.com. To install the software to your system, insert the disc into an

available CD-ROM drive. Navigate to the drive contents and open the INA3221EVM software folder.

Locate the compressed file (INA3221EVM.zip) and open it. Using WinZIP

, or a similar file compression

program, extract the INA3221EVM files into a specific INA3221EVM folder (for example, C:\INA3221EVM)

on your hard drive.

When the files are extracted, navigate to the INA3221EVM folder you created on the hard drive. Locate

the setup.exe file and execute it to start the installation. The INA3221 software installer file then begins the

installation process, as shown in Figure 10.

Figure 10. INA3221EVM Software Installation Window

After the installation process initializes, the user is given the choice of selecting the directory in which to

install the program; the default location is C:\Program Files\INA3221\ and C:\Program Files\National

Instruments\. Following this option, two license agreements are presented that must be accepted, as

illustrated in Figure 11. After accepting the Texas Instruments and National Instruments license

agreements, the progress bar opens and shows the installation of the software, refer to Figure 12. When

the installation process is completed, click Finish.

INA3221EVM Evaluation Board and Software Tutorial SBOU126–April 2012

Submit Documentation Feedback