Datasheet

INA200
INA201
INA202
www.ti.com SBOS374C –NOVEMBER 2006–REVISED OCTOBER 2010
ELECTRICAL CHARACTERISTICS: GENERAL
Boldface limits apply over the specified temperature range: T
A
= –40°C to +125°C.
At T
A
= +25°C, V
S
= +12V, V
CM
= +12V, V
SENSE
= 100mV, R
L
= 10kΩ to GND, R
PULL-UP
= 5.1kΩ connected from CMP
OUT
to
V
S
, and CMP
IN
= 1V, unless otherwise noted.
INA200, INA201, INA202
GENERAL PARAMETERS CONDITIONS MIN TYP MAX UNIT
POWER SUPPLY
Operating Power Supply V
S
+2.7 +18 V
Quiescent Current I
Q
V
OUT
= 2V 1350 1800 mA
Over Temperature V
SENSE
= 0mV 1850 mA
Comparator Power-On Reset Threshold
(1)
1.5 V
TEMPERATURE
Specified Temperature Range –40 +125 °C
Operating Temperature Range –55 +150 °C
Storage Temperature Range –65 +150 °C
Thermal Resistance q
JA
MSOP-8 Surface-Mount 200 °C/W
SO-8 150 °C/W
(1) The INA200, INA201, and INA202 are designed to power-up with the comparator in a defined reset state as long as RESET is open or
grounded. The comparator is in reset as long as the power supply is below the voltage shown here. The comparator assumes a state
based on the comparator input above this supply voltage. If RESET is high at power-up, the comparator output comes up high and
requires a reset to assume a low state, if appropriate.
Copyright © 2006–2010, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s): INA200 INA201 INA202