Datasheet
1
2
3
4
8
7
6
5
V
IN+
V
IN-
CMP
OUT
RESET
V+
OUT
CMP
IN
GND
INA200-INA202
MSOP-8(DGK),
SO-8(D)
INA200
INA201
INA202
SBOS374C –NOVEMBER 2006–REVISED OCTOBER 2010
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
PACKAGE
PRODUCT GAIN PACKAGE-LEAD DESIGNATOR PACKAGE MARKING
MSOP-8 DGK BQH
INA200 20V/V
SO-8 D INA200A
MSOP-8 DGK BQJ
INA201 50V/V
SO-8 D INA201A
MSOP-8 DGK BQL
INA202 100V/V
SO-8 D INA202A
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the
device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
VALUE UNIT
Supply Voltage, V+ 18 V
Current-Shunt Monitor Analog Inputs, V
IN+
, V
IN–
Differential (V
IN+
) – (V
IN–
) –18 to +18 V
Common Mode
(2)
–16 to +80 V
Comparator Analog Input and Reset Pins
(2)
GND – 0.3 to (V+) + 0.3 V
Analog Output, Out
(2)
GND – 0.3 to (V+) + 0.3 V
Comparator Output, Out Pin
(2)
GND – 0.3 to 18 V
Input Current Into Any Pin
(2)
5 mA
Operating Temperature –55 to +150 °C
Storage Temperature –65 to +150 °C
Junction Temperature +150 °C
ES Human Body Model (HBM) 4000 V
D
Charged Device Model (CDM) 1000 V
Rat
ing
s
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) This voltage may exceed the ratings shown if the current at that pin is limited to 5mA.
PIN CONFIGURATIONS
2 Submit Documentation Feedback Copyright © 2006–2010, Texas Instruments Incorporated
Product Folder Link(s): INA200 INA201 INA202