Datasheet

INA170
2
SBOS193D
www.ti.com
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
Supply Voltage, V+ to GND ................................................. –0.3V to 40V
Analog Inputs, Common Mode
(2)
......................................... –0.3V to 75V
Differential (V
IN
+
) – (V
IN
–
) .................................. –40V to 2V
Analog Output, Out
(2)
........................................................... –0.3V to 40V
Input Current Into Any Pin ............................................................... 10mA
Operating Temperature ..................................................–55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature .................................................................... +150°C
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of the
device at these or any other conditions beyond those specified is not implied.
(2) The input voltage at any pin may exceed the voltage shown if the current
at that pin is limited to 10mA.
ABSOLUTE MAXIMUM RATINGS
(1)
PIN DESIGNATOR DESCRIPTION
1V
IN
–
Inverting Input
2V
IN
+
Noninverting Input
3V
REF
Reference Voltage Input
4 GND Ground
5R
OS
Offset Resistor
6 OUT Output
7 NC No Connection
8 V+ Supply Voltage
PIN CONFIGURATION
TOP VIEW MSOP
PIN DESCRIPTION
V
IN
V
IN
V
REF
GND
V+
NC
OUT
R
OS
1
2
3
4
8
7
6
5
–
+
PACKAGE/ORDERING INFORMATION
(1)
NOTE: (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at
www.ti.com.
SPECIFIED
PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE-LEAD DESIGNATOR RANGE MARKING NUMBER MEDIA, QUANTITY
INA170EA MSOP-8 DGK –40°C to +85°C INA170EA INA170EA/250 Tape and Reel, 250
"" " ""INA170EA/2K5 Tape and Reel, 2500